Hello guys, I'm having an issue installing Windows Media Center Edition 2005 with SP2 from scratch. I'm using a SATA II PCIe RAID 2PORT controller to create a RAID0 with two 300GB SATA II 3Gb hard drives, I was able to create the array, the installation starts ok, it loads the controller drives ok, (Silicon Image Sil 3132 SoftRaid5 Controller), so the floppy it's accessed fine, after i create the partition, the installation tries to copy the driver files from the floppy drive, and it gives this error: "Setup cannot copy the file: Si3132r5.sys", I got the same message for all the other driver files on the floppy. I've tried everything possible, I'm deciding to return the card. The weird thing is that I was able to install Windows XP Professional perfectly. I'd really appreciate any suggestions. Thank you.
I had the same problem. I just edited the txtsetup.sif manually and added the missing .sys files under the [SourceDisksFiles] section. My si31xx.sys section for reference: CODEsi3124r.sys = 1,,,,,,4_,4,1,,,1,4 si3124.sys = 1,,,,,,4_,4,1,,,1,4 si3124r5.sys = 1,,,,,,4_,4,1,,,1,4 si3132r5.sys = 1,,,,,,4_,4,1,,,1,4 si3132.sys = 1,,,,,,4_,4,1,,,1,4 si3114r5.sys = 1,,,,,,4_,4,1,,,1,4 si3114r.sys = 1,,,,,,4_,4,1,,,1,4 si3112r.sys = 1,,,,,,4_,4,1,,,1,4 si3112.sys = 1,,,,,,4_,4,1,,,1,4 si3114.sys = 1,,,,,,4_,4,1,,,1,4 Check if you're missing any of those and add them to your [SourceDisksFiles] section.If you keep getting the same error with a different file, just add them manuall hope its heplfull
Silicon Image Sil 3132 OK clever cloggs. I'm jealous. I purchased the same card but can't get it working. My motherboard wont even detect it. I've asked ASUS but have received no reply. Is there something magical that you have to do in the BIOS to get this thing working? Helppp