need help badly!

mista_haqeem · 11th Aug 2006, 11:14 AM

gud day guys...
i need your help...!
my friend gave me this old pc...
ACER POWER S SERIES...
the problem is i cannot rectify this pc problem...
when i attach to the monitor, it didn't display anything...
blank!
---
i didn't know this pc processor clock speed...
i think it's an intel celeron...
i think it use S57m system board Sis 630(sorry,i didn't got the mobo manufacture name)
but i got the model number for this pc (H61-1200 HSF)
it used 128MB SD RAM...
as i know this mobo didn't have any AGP slot...
---
i've already tested the hard disk on my another rig...
and it runs quite fine...
the PSU did good...
---
please help me with this problem...
i've run out of idea...

Max_87 · 11th Aug 2006, 03:20 PM

Try removing all expansion cards, hard drives, optical drives etc and try booting up the system. If it boots the try plugging in the cards/drives one by one and try again, this way its easier to find out which component is the culprit. However if it still doesn't boot after you removed all the components except CPU/mobo/ram, try reseting the BIOS and try plugging the memory module to other slots. If it has two memory modules try one at a time.

If all else fails then you will need additional components to test the CPU/mobo/ram. One of them is probably damaged.

mista_haqeem · 11th Aug 2006, 03:26 PM

Quote:

Originally Posted by Max_87

Try removing all expansion cards, hard drives, optical drives etc and try booting up the system. If it boots the try plugging in the cards/drives one by one and try again, this way its easier to find out which component is the culprit. However if it still doesn't boot after you removed all the components except CPU/mobo/ram, try reseting the BIOS and try plugging the memory module to other slots. If it has two memory modules try one at a time.

If all else fails then you will need additional components to test the CPU/mobo/ram. One of them is probably damaged.

i've done this...
but still cannot recognize the problem...
i've already try using PCI gfx card...(not pci-e card)
still cannot work...
hmmm...

Max_87 · 11th Aug 2006, 03:27 PM

Maybe the ram/mobo is damaged? You will need additional components/PC to test this though.

mista_haqeem · 11th Aug 2006, 03:42 PM

i've already test the RAM in another rig and it works...
i think the major problem is the mobo...

Max_87 · 11th Aug 2006, 03:55 PM

Oh, should be the mobo then. It's unlikely that the processor is damaged.

mista_haqeem · 11th Aug 2006, 03:57 PM

absolutely no...
the processor runs well...
i'll try with a different mobo...

11th Aug 2006, 11:14 AM	#1 (permalink)
mista_haqeem Warming up Join Date: 9 Aug 2006 Location: Kingston, Jamaica Posts: 92 Reputation: 20 Rep Power: 0	need help badly! gud day guys... i need your help...! my friend gave me this old pc... ACER POWER S SERIES... the problem is i cannot rectify this pc problem... when i attach to the monitor, it didn't display anything... blank! --- i didn't know this pc processor clock speed... i think it's an intel celeron... i think it use S57m system board Sis 630(sorry,i didn't got the mobo manufacture name) but i got the model number for this pc (H61-1200 HSF) it used 128MB SD RAM... as i know this mobo didn't have any AGP slot... --- i've already tested the hard disk on my another rig... and it runs quite fine... the PSU did good... --- please help me with this problem... i've run out of idea... __________________ Intel C2D E6600 / Intel C2D E6300 Asus P5N32-SLI SE Deluxe / Gigabyte 945P-S3 Corsair XMS2 DDR2 1GB / Kingston HyperX DDR2 1GB Enermax Noisetaker 600w / Cooler Master 430w XFX 7900GT / XFX 7600GT

11th Aug 2006, 03:20 PM	#2 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: Sarawak, Malaysia. Posts: 11,331 Reputation: 2090 Rep Power: 37	Try removing all expansion cards, hard drives, optical drives etc and try booting up the system. If it boots the try plugging in the cards/drives one by one and try again, this way its easier to find out which component is the culprit. However if it still doesn't boot after you removed all the components except CPU/mobo/ram, try reseting the BIOS and try plugging the memory module to other slots. If it has two memory modules try one at a time. If all else fails then you will need additional components to test the CPU/mobo/ram. One of them is probably damaged. __________________ Max_87 Tech ARP http://www.techarp.com E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

11th Aug 2006, 03:27 PM	#4 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: Sarawak, Malaysia. Posts: 11,331 Reputation: 2090 Rep Power: 37	Maybe the ram/mobo is damaged? You will need additional components/PC to test this though. __________________ Max_87 Tech ARP http://www.techarp.com E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

11th Aug 2006, 03:42 PM	#5 (permalink)
mista_haqeem Warming up Join Date: 9 Aug 2006 Location: Kingston, Jamaica Posts: 92 Reputation: 20 Rep Power: 0	i've already test the RAM in another rig and it works... i think the major problem is the mobo... __________________ Intel C2D E6600 / Intel C2D E6300 Asus P5N32-SLI SE Deluxe / Gigabyte 945P-S3 Corsair XMS2 DDR2 1GB / Kingston HyperX DDR2 1GB Enermax Noisetaker 600w / Cooler Master 430w XFX 7900GT / XFX 7600GT

11th Aug 2006, 03:55 PM	#6 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: Sarawak, Malaysia. Posts: 11,331 Reputation: 2090 Rep Power: 37	Oh, should be the mobo then. It's unlikely that the processor is damaged. __________________ Max_87 Tech ARP http://www.techarp.com E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

11th Aug 2006, 03:57 PM	#7 (permalink)
mista_haqeem Warming up Join Date: 9 Aug 2006 Location: Kingston, Jamaica Posts: 92 Reputation: 20 Rep Power: 0	absolutely no... the processor runs well... i'll try with a different mobo... __________________ Intel C2D E6600 / Intel C2D E6300 Asus P5N32-SLI SE Deluxe / Gigabyte 945P-S3 Corsair XMS2 DDR2 1GB / Kingston HyperX DDR2 1GB Enermax Noisetaker 600w / Cooler Master 430w XFX 7900GT / XFX 7600GT