Will a hard drive immersed in non-conductive fluid or oil work properly? - Page 4

Mac Daddy · 28th May 2008, 10:11 AM

Quote:

Originally Posted by Adrian Wong

Hmm.. Don't think you want to do that. That would introduce dust into the drive. Why not just seal the edges of the top plate with silicon?

Better idea and will try it out as soon as I get my new drive ... the platter assembly is well sealed from the electronics ... worth a shot

Adrian Wong · 28th May 2008, 10:24 AM

Okay, someone thinks it's possible. Can that person tell us why?

Papercut · 28th May 2008, 09:16 PM

Quote:

Originally Posted by mikegas

I am amaze.. maybe .. they can try ...put the breather hole with a tube, then put the tube outside like snookering ..

Think you mean snorkelling. To me, snookering means putting the cue ball in such a position that the opposing player has no direct shot at his ball(s)

Adrian Wong · 28th May 2008, 09:42 PM

Quote:

Originally Posted by Papercut

Think you mean snorkelling. To me, snookering means putting the cue ball in such a position that the opposing player has no direct shot at his ball(s)

Yeah, he meant snorkelling. It's the only way to provide some air supply to the breather holes without the non-conductive liquid blocking it up or soaking through.

PsYkHoTiK · 28th May 2008, 09:47 PM

Quote:

Originally Posted by Papercut

Think you mean snorkelling. To me, snookering means putting the cue ball in such a position that the opposing player has no direct shot at his ball(s)

lol. pwnzor...

Lacus · 28th May 2008, 11:18 PM

I wonder should i try on my old dying Hdd :whistles:

Adrian Wong · 28th May 2008, 11:31 PM

Quote:

Originally Posted by Lacus

I wonder should i try on my old dying Hdd :whistles:

Well, if you want to try, make sure the top plate is sealed properly and there's a snorkel or two for the breather holes. Some breather holes are located at the bottom of the drive though.

Finally, don't forget to immerse only in non-conductive fluids like oil. Soaking in water will definitely result in a short circuit.

mikegas · 29th May 2008, 12:52 AM

Quote:

Originally Posted by Adrian Wong

Yeah, he meant snorkelling. It's the only way to provide some air supply to the breather holes without the non-conductive liquid blocking it up or soaking through.

O_o .. too much use of brain cell .. corrupted english .. argh .. yeah i meant tat blup blup thing you do at the seaside ..

Adrian Wong · 29th May 2008, 12:57 AM

Quote:

Originally Posted by mikegas

O_o .. too much use of brain cell .. corrupted english .. argh .. yeah i meant tat blup blup thing you do at the seaside ..

It's okay, they sound about the same.

mikegas · 29th May 2008, 08:10 AM

Just remembered, underneath the PCB, there is the connector from the head stack to the PCBA. Remember to silicon the side of the connector as well. Also you might want to silicon all the screws just incase. Remember to take a video and post it at youtube. Good Luck!

View Poll Results: Can a hard drive immersed in non-conductive liquid work properly?
Yes, I think it's possible.	5	21.74%
No way! No way in hell it will run.	18	78.26%
I don't really care or wish to guess.	0	0%
Voters: 23. You may not vote on this poll

28th May 2008, 10:24 AM	#32 (permalink)
Adrian Wong Da Boss Join Date: 10 Oct 2002 Location: In front of my BenQ Joybook 7000 notebook! Posts: 29,961 Reputation: 2958 Rep Power: 65	Okay, someone thinks it's possible. Can that person tell us why? __________________ Dr. Adrian Wong Tech ARP \| Blog @ Tech ARP \| The Free Trade Zone DYKT : The only offshore account I have is at the sand bank? Keep Tech ARP free! Visit our sponsors! We need PROGRAMMERS and TECHNICAL WRITERS! Contact us if you are a hot shot programmer or technical writer! My items for sale : 50x SD Card \| Memory Stick PRO \| Cyclone Energy Saver \| Seiko SS watch \| Tiger/Carlsberg beer jugs \| Travel Speakers \| Motorola V600 \| Nokia N90 SOLD! \| New Lowepro Mini Trekker AW Other items for sale @ the FTZ : Zalman CNPS9500 LED @ $20 \| Zalman CNPS7700 Cu @ $20 \| Zalman CNPS7000 Cu @ $20 \| Swarovski bracelet watches \| Dell 17" LCD \| Hi-Fi speakers \| English DIVX movies \| HP LaserJet toners! \| Office chairs

28th May 2008, 11:18 PM	#36 (permalink)
Lacus Active Join Date: 28 Mar 2008 Posts: 978 Reputation: 166 Rep Power: 2	I wonder should i try on my old dying Hdd :whistles: __________________ GUNDAM 00[CPU=Intel Celeron Dual Core E1200 (3200Mhz) [Cooled By Xigmatek S1283 with Crossbow] \| Mobo=Asus Maximus Formula \| GPU=Gigabyte HD4850 512MB GDDR3+T-Rad2 \| RAM=4x1gb DDR2 800Mhz Corsair XMS2 \| HDD=Western Digital WD6400AAKS 640GB \| Soundcard=Doom's Creative X-FI XtremeMusic \| Speakers=Creative Inspire P5800 \| PSU=Silverstone Strider ST56F \| Keyboard=Creative Prodikeys DM \| Mouse=Logitech MX518\| Casing=Lian Li PC-7YCF]

29th May 2008, 08:10 AM	#40 (permalink)
mikegas I'm a regular Join Date: 7 May 2008 Posts: 329 Reputation: 206 Rep Power: 3	Just remembered, underneath the PCB, there is the connector from the head stack to the PCBA. Remember to silicon the side of the connector as well. Also you might want to silicon all the screws just incase. Remember to take a video and post it at youtube. Good Luck!