Can't load my Window

gdi1986 · 6th Jan 2006, 01:27 AM

I am using windows XP service pack 2. I can't go in the Window-> U know when there is screen with a window logo and a bar running one... when u see the blue bar running( just for a second), it auto restart and it also ask for option like "start window in safe mode" and so on before that. I choose start normally of course but still the same it keep auto restart. I try to put my hard disc into other pc and it can go into window and without asking anything.... can anybody help me? or need me to give more specific information? TQ

Sry for my language and grammar >.<

aKho · 6th Jan 2006, 01:40 AM

could be registry corrupted, a RAM problem, CPU not enough power, processor too hot? maybe a little more info on when it started acting up... did you recently change something?

anyway fyi, since WinXp disabled the blue screen of death and opted for a reboot instead whenever it crashes, hard to figure out what's the problem causing it without knowing the error messages..

clickie : http://www.theeldergeek.com/auto_reb...stem_crash.htm

EDIT : you mentioned the HDD works fine on another PC, was the HDD previously working ok with this PC?

Adrian Wong · 6th Jan 2006, 03:16 AM

Hmm.. You should tell us more about your system - is it a new system? what are the system specs? etc...

Also, did you check your memory modules with Memtest86?

gdi1986 · 6th Jan 2006, 08:30 AM

Ya the HDD previously working good in my pc but after format very unstable..... This is my spec...
ABIT KV8 Pro Socket 754
AMD Athlon 64 2800+
Apacer 512 Ram
Gecube ATI-9600XT 128 Bit 256RAM
Western Digital 80GB SATA Hardisk

aKho · 6th Jan 2006, 10:03 AM

Quote:

Originally Posted by gdi1986

Ya the HDD previously working good in my pc but after format very unstable..... This is my spec...
ABIT KV8 Pro Socket 754
AMD Athlon 64 2800+
Apacer 512 Ram
Gecube ATI-9600XT 128 Bit 256RAM
Western Digital 80GB SATA Hardisk

i'm guessing your SATA HDD is less than 2 years old.. i'm also narrowing it down to either the HDD or the mobo as the main culprit. do you have another HDD to try boot up with that mobo? perhaps an ATA HDD instead..

oh yeah, before that you could maybe try using your other SATA ports as well...

gdi1986 · 6th Jan 2006, 11:49 AM

i don have another HDD help me to boot up and i have try another ATA slot but still the same.... have any ideas?

aKho · 6th Jan 2006, 12:15 PM

Quote:

Originally Posted by gdi1986

i don have another HDD help me to boot up and i have try another ATA slot but still the same.... have any ideas?

you mean you've got only 1 SATA HDD.. and that you tried the other SATA slots but it doesn't work as well? then it could be something wrong with the mobo SATA slots... how long have you had that mobo?

Adrian Wong · 6th Jan 2006, 03:03 PM

Wait.. Try booting up with a Memtest86 boot disk and checking your memory modules first. Use a thorough test.

gdi1986 · 6th Jan 2006, 11:16 PM

If after the memtest everything is fine... then what problem cound it be?? the biggest posibility will be Mainboard?

Adrian Wong · 8th Jan 2006, 02:48 AM

Quote:

Originally Posted by gdi1986

If after the memtest everything is fine... then what problem cound it be?? the biggest posibility will be Mainboard?

Let's not get ahead of ourselves. Test with Memtest86 and see what it reports.

6th Jan 2006, 01:27 AM	#1 (permalink)
gdi1986 Newbie Join Date: 6 Jan 2006 Posts: 14 Reputation: 0 Rep Power: 0	Can't load my Window I am using windows XP service pack 2. I can't go in the Window-> U know when there is screen with a window logo and a bar running one... when u see the blue bar running( just for a second), it auto restart and it also ask for option like "start window in safe mode" and so on before that. I choose start normally of course but still the same it keep auto restart. I try to put my hard disc into other pc and it can go into window and without asking anything.... can anybody help me? or need me to give more specific information? TQ Sry for my language and grammar >.<

6th Jan 2006, 01:40 AM	#2 (permalink)
aKho beat around the bush Join Date: 3 Jun 2005 Location: Kuala Lumpur Posts: 2,830 Reputation: 1239 Rep Power: 19	could be registry corrupted, a RAM problem, CPU not enough power, processor too hot? maybe a little more info on when it started acting up... did you recently change something? anyway fyi, since WinXp disabled the blue screen of death and opted for a reboot instead whenever it crashes, hard to figure out what's the problem causing it without knowing the error messages.. clickie : http://www.theeldergeek.com/auto_reb...stem_crash.htm EDIT : you mentioned the HDD works fine on another PC, was the HDD previously working ok with this PC? __________________

6th Jan 2006, 03:16 AM	#3 (permalink)
Adrian Wong Da Boss Join Date: 10 Oct 2002 Location: In front of my ASUS F8V notebook! Posts: 33,143 Reputation: 3730 Rep Power: 78	Hmm.. You should tell us more about your system - is it a new system? what are the system specs? etc... Also, did you check your memory modules with Memtest86? __________________ Dr. Adrian Wong Tech ARP \| Blog @ Tech ARP \| The Free Trade Zone DYKT : The only offshore account I have is at the sand bank? We need PROGRAMMERS and TECHNICAL WRITERS! Contact us if you are a hot shot programmer or technical writer! My items for sale : 50x SD Card \| Memory Stick PRO \| Cyclone Energy Saver \| Seiko SS watch \| Tiger/Carlsberg beer jugs \| Travel Speakers \| Motorola V600 \| Nokia N90 SOLD! \| New Lowepro Mini Trekker AW Other items for sale @ the FTZ : Zalman CNPS9500 LED @ $20 \| Zalman CNPS7700 Cu @ $20 \| Zalman CNPS7000 Cu @ $20 \| Swarovski bracelet watches \| Dell 17" LCD \| Hi-Fi speakers \| English DIVX movies \| HP LaserJet toners! \| Office chairs

6th Jan 2006, 08:30 AM	#4 (permalink)
gdi1986 Newbie Join Date: 6 Jan 2006 Posts: 14 Reputation: 0 Rep Power: 0	Ya the HDD previously working good in my pc but after format very unstable..... This is my spec... ABIT KV8 Pro Socket 754 AMD Athlon 64 2800+ Apacer 512 Ram Gecube ATI-9600XT 128 Bit 256RAM Western Digital 80GB SATA Hardisk Last edited by gdi1986 : 6th Jan 2006 at 08:36 AM.

6th Jan 2006, 03:03 PM	#8 (permalink)
Adrian Wong Da Boss Join Date: 10 Oct 2002 Location: In front of my ASUS F8V notebook! Posts: 33,143 Reputation: 3730 Rep Power: 78	Wait.. Try booting up with a Memtest86 boot disk and checking your memory modules first. Use a thorough test. __________________ Dr. Adrian Wong Tech ARP \| Blog @ Tech ARP \| The Free Trade Zone DYKT : The only offshore account I have is at the sand bank? We need PROGRAMMERS and TECHNICAL WRITERS! Contact us if you are a hot shot programmer or technical writer! My items for sale : 50x SD Card \| Memory Stick PRO \| Cyclone Energy Saver \| Seiko SS watch \| Tiger/Carlsberg beer jugs \| Travel Speakers \| Motorola V600 \| Nokia N90 SOLD! \| New Lowepro Mini Trekker AW Other items for sale @ the FTZ : Zalman CNPS9500 LED @ $20 \| Zalman CNPS7700 Cu @ $20 \| Zalman CNPS7000 Cu @ $20 \| Swarovski bracelet watches \| Dell 17" LCD \| Hi-Fi speakers \| English DIVX movies \| HP LaserJet toners! \| Office chairs

6th Jan 2006, 11:49 AM	#6 (permalink)
gdi1986 Newbie Join Date: 6 Jan 2006 Posts: 14 Reputation: 0 Rep Power: 0	i don have another HDD help me to boot up and i have try another ATA slot but still the same.... have any ideas?

6th Jan 2006, 11:16 PM	#9 (permalink)
gdi1986 Newbie Join Date: 6 Jan 2006 Posts: 14 Reputation: 0 Rep Power: 0	If after the memtest everything is fine... then what problem cound it be?? the biggest posibility will be Mainboard?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The ATI Radeon To ATI FireGL Mod Guide!	Chai	Reviews & Articles	602	12th Jul 2009 04:56 AM