Windows 7 installation BSOD - Page 2

karhoe · 29th Aug 2009, 01:00 AM

I had to, I already spent 6 hours trying to get 7 into the PC, it was working so well before the motherboard died, I got a new motherboard on the spot, same model, same revision (but some color changes on the heatsink holder, could indicate some changes albeit same revision).

Normally, popping everything back and it should work, I was instead greeted by a BSOD, and then I formatted the entire hard disk, tried various ways, kept getting the same BSOD which appears right after installation.

I went to IRQ setting, the options I had is only to assign IRQ to PCI1 and PCI2

DarKSeeD · 29th Aug 2009, 01:39 AM

Try to boot from a disc with Hiren tools on it. It has an option to run a miniXP version. Do some hardware test with the tools from the disc.

karhoe · 29th Aug 2009, 01:41 AM

Well, I doubt this is hardware issue but the driver issue, probably the bundled ATI driver on Windows 7 64 bit.

I'm getting my hands on a 32bit Windows 7 tomorow and I strongly believe the same problem would not repeat. I really do hope because 6 hours have been wasted just like that today, not including the time I took to RMA the motherboard and buy new thermal paste

DarKSeeD · 29th Aug 2009, 02:12 AM

Can you post a log of the crash?

karhoe · 29th Aug 2009, 10:29 AM

I tried to install back Vista, it went fine...until I installed Catalyst, then the SAME BSOD came back, what's happening now?

Where do I find the log?

karhoe · 29th Aug 2009, 10:45 AM

Close I can get is the minidump file, don't know how to get BSOD log

DarKSeeD · 29th Aug 2009, 07:51 PM

It should be found in the Application or System via Control Panel - Administrative Tools - Event Viewer. I'm looking right now on dmp.

karhoe · 29th Aug 2009, 08:00 PM

I went there, but didn't know which is BSOD, so I posted the dump file.

But if the same thing were to happen with Windows Vista, certainly it's hardware issue already, though I would be glad if there are solutions

DarKSeeD · 29th Aug 2009, 08:05 PM

The dmp is from the 32 or the 64bit version?

DarKSeeD · 29th Aug 2009, 08:21 PM

I'm sorry but I'll have to take a break, I'm half asleep and I can't go on, just had an excellent meal and I must make my daily siesta

Meanwhile please check for Gigabyte MA78GM-S2H BIOS options with different configurations. I still think it's something related to the BIOS configuration of the onboard videocard or maybe try to do a BIOS downgrade. BBL, 10x

29th Aug 2009, 01:00 AM	#11 (permalink)
karhoe Active Join Date: 29 Nov 2006 Posts: 601 Reputation: 11 Rep Power: 3	I had to, I already spent 6 hours trying to get 7 into the PC, it was working so well before the motherboard died, I got a new motherboard on the spot, same model, same revision (but some color changes on the heatsink holder, could indicate some changes albeit same revision). Normally, popping everything back and it should work, I was instead greeted by a BSOD, and then I formatted the entire hard disk, tried various ways, kept getting the same BSOD which appears right after installation. I went to IRQ setting, the options I had is only to assign IRQ to PCI1 and PCI2 __________________ My Blog SPM Timetable 2009

29th Aug 2009, 01:39 AM	#12 (permalink)
DarKSeeD BOG Translator Join Date: 30 Oct 2004 Location: Sighisoara, Romania Posts: 336 Reputation: 101 Rep Power: 7	Try to boot from a disc with Hiren tools on it. It has an option to run a miniXP version. Do some hardware test with the tools from the disc. __________________ Gizas! what a mess

29th Aug 2009, 01:41 AM	#13 (permalink)
karhoe Active Join Date: 29 Nov 2006 Posts: 601 Reputation: 11 Rep Power: 3	Well, I doubt this is hardware issue but the driver issue, probably the bundled ATI driver on Windows 7 64 bit. I'm getting my hands on a 32bit Windows 7 tomorow and I strongly believe the same problem would not repeat. I really do hope because 6 hours have been wasted just like that today, not including the time I took to RMA the motherboard and buy new thermal paste __________________ My Blog SPM Timetable 2009

29th Aug 2009, 02:12 AM	#14 (permalink)
DarKSeeD BOG Translator Join Date: 30 Oct 2004 Location: Sighisoara, Romania Posts: 336 Reputation: 101 Rep Power: 7	Can you post a log of the crash? __________________ Gizas! what a mess

29th Aug 2009, 10:29 AM	#15 (permalink)
karhoe Active Join Date: 29 Nov 2006 Posts: 601 Reputation: 11 Rep Power: 3	I tried to install back Vista, it went fine...until I installed Catalyst, then the SAME BSOD came back, what's happening now? Where do I find the log? __________________ My Blog SPM Timetable 2009

29th Aug 2009, 07:51 PM	#17 (permalink)
DarKSeeD BOG Translator Join Date: 30 Oct 2004 Location: Sighisoara, Romania Posts: 336 Reputation: 101 Rep Power: 7	It should be found in the Application or System via Control Panel - Administrative Tools - Event Viewer. I'm looking right now on dmp. __________________ Gizas! what a mess

29th Aug 2009, 08:00 PM	#18 (permalink)
karhoe Active Join Date: 29 Nov 2006 Posts: 601 Reputation: 11 Rep Power: 3	I went there, but didn't know which is BSOD, so I posted the dump file. But if the same thing were to happen with Windows Vista, certainly it's hardware issue already, though I would be glad if there are solutions __________________ My Blog SPM Timetable 2009

29th Aug 2009, 08:05 PM	#19 (permalink)
DarKSeeD BOG Translator Join Date: 30 Oct 2004 Location: Sighisoara, Romania Posts: 336 Reputation: 101 Rep Power: 7	The dmp is from the 32 or the 64bit version? __________________ Gizas! what a mess

29th Aug 2009, 08:21 PM	#20 (permalink)
DarKSeeD BOG Translator Join Date: 30 Oct 2004 Location: Sighisoara, Romania Posts: 336 Reputation: 101 Rep Power: 7	I'm sorry but I'll have to take a break, I'm half asleep and I can't go on, just had an excellent meal and I must make my daily siesta Meanwhile please check for Gigabyte MA78GM-S2H BIOS options with different configurations. I still think it's something related to the BIOS configuration of the onboard videocard or maybe try to do a BIOS downgrade. BBL, 10x __________________ Gizas! what a mess

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GUIDE] Integrate software into your Windows installation CD	rado354	General Software	24	5th Dec 2008 09:28 PM
[GUIDE] Creating The Ultimate Windows XP Installation CD/DVD	rado354	General Software	1	13th Dec 2007 03:36 PM
Windows XP Installation Problem	a_philosopher	General Software	2	17th Mar 2006 01:50 PM