AZTECH DSL600ER + AZTECH WL830RT4, Cannot Connect Wireless to the NET - Page 2

mikegas · 9th Sep 2008, 01:30 PM

Modem and router ip address different?

fazili74 · 10th Sep 2008, 08:20 AM

Dear Mike,

Yes, the router and modem have different address

Modem - 192.168.1.1
Router - 192.168.1.2

mikegas · 10th Sep 2008, 10:04 AM

If you could go into the modem config page on your explorer to see status of the router if this IP is detected and connected?

fazili74 · 10th Sep 2008, 11:17 AM

Dear Mike.

How to do that, appreciate your help

Adrian Wong · 10th Sep 2008, 12:37 PM

That's odd. It looks like you set up your modem and router the wrong way.

IMHO, you should disable the modem's built-in DHCP server so that the router does that instead.

The router's IP address should be 192.168.1.1 and you should not be able to access the modem directly. You should also set the modem to run in bridge mode.

zy · 10th Sep 2008, 12:51 PM

i'm using 605E at home. recently configured.

make sure you do a hard reset on the modem.

press the small little tiny hole which says reset for couple of seconds till you see the modem reboot.

connect it to the WAN port of the router.

fazili74 · 11th Sep 2008, 02:05 PM

Dear zy,

Yes i connect it to the wan but the problem is the no internet light observed at the router,

Adrian Wong · 12th Sep 2008, 02:43 PM

Quote:

Originally Posted by fazili74

Dear zy,

Yes i connect it to the wan but the problem is the no internet light observed at the router,

Please note that all routers have a special port for the DSL modem. You MUST connect the DSL modem to that port. You cannot just connect the DSL modem to the other available LAN ports.

zy · 12th Sep 2008, 10:45 PM

is the ethernet light on your modem turns on when u connect to the WAN port of the router?

fazili74 · 15th Sep 2008, 10:25 AM

Dear zy,

Nope my ethernet light did not on when i connect to the wan port of the router.

10th Sep 2008, 12:37 PM	#15 (permalink)
Adrian Wong Da Boss Join Date: 10 Oct 2002 Location: In front of my ASUS F8V notebook! Posts: 30,419 Reputation: 3147 Rep Power: 68	That's odd. It looks like you set up your modem and router the wrong way. IMHO, you should disable the modem's built-in DHCP server so that the router does that instead. The router's IP address should be 192.168.1.1 and you should not be able to access the modem directly. You should also set the modem to run in bridge mode. __________________ Dr. Adrian Wong Tech ARP \| Blog @ Tech ARP \| The Free Trade Zone DYKT : The only offshore account I have is at the sand bank? We need PROGRAMMERS and TECHNICAL WRITERS! Contact us if you are a hot shot programmer or technical writer! My items for sale : 50x SD Card \| Memory Stick PRO \| Cyclone Energy Saver \| Seiko SS watch \| Tiger/Carlsberg beer jugs \| Travel Speakers \| Motorola V600 \| Nokia N90 SOLD! \| New Lowepro Mini Trekker AW Other items for sale @ the FTZ : Zalman CNPS9500 LED @ $20 \| Zalman CNPS7700 Cu @ $20 \| Zalman CNPS7000 Cu @ $20 \| Swarovski bracelet watches \| Dell 17" LCD \| Hi-Fi speakers \| English DIVX movies \| HP LaserJet toners! \| Office chairs

10th Sep 2008, 12:51 PM	#16 (permalink)
zy Dead Join Date: 16 Dec 2002 Location: Penang,Malaysia - Buffalo,New York Posts: 12,884 Reputation: 2064 Rep Power: 39	i'm using 605E at home. recently configured. make sure you do a hard reset on the modem. press the small little tiny hole which says reset for couple of seconds till you see the modem reboot. connect it to the WAN port of the router. __________________ current: P4-3.2\|P4P800-Deluxe\|512x4-DDR\|NV6600 WD2500KS\|WD5000AAKS\|AD-7191A\|1860NX\|Z2300\|MP470 home (malaysia): P4C-2.6@3.1-StockHSF\|AI7\|256x2-BT-D43\|512x2-DT-D43\|A9600XT-VIVO WD1200JB\|2xWD2500KS\|DRU-800A\|DVD-E616P\|LTR-52327S\|152x\|V.S.4121\|iP1500 laptop: M1210\|T7200\|2GBDDR667\|160GB5K160\|GO7400

12th Sep 2008, 10:45 PM	#19 (permalink)
zy Dead Join Date: 16 Dec 2002 Location: Penang,Malaysia - Buffalo,New York Posts: 12,884 Reputation: 2064 Rep Power: 39	is the ethernet light on your modem turns on when u connect to the WAN port of the router? __________________ current: P4-3.2\|P4P800-Deluxe\|512x4-DDR\|NV6600 WD2500KS\|WD5000AAKS\|AD-7191A\|1860NX\|Z2300\|MP470 home (malaysia): P4C-2.6@3.1-StockHSF\|AI7\|256x2-BT-D43\|512x2-DT-D43\|A9600XT-VIVO WD1200JB\|2xWD2500KS\|DRU-800A\|DVD-E616P\|LTR-52327S\|152x\|V.S.4121\|iP1500 laptop: M1210\|T7200\|2GBDDR667\|160GB5K160\|GO7400

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Linksys wireless router, aztech modem, streamyx, but no internet	royce81	Internet & Networking	26	12th Sep 2008 02:44 PM
aztech WL830RT4 problem	dreamer_lek91	Internet & Networking	8	24th May 2008 02:09 AM
Modem Aztech cannot log in	F55-18	Internet & Networking	2	16th Nov 2007 05:19 PM
aztech 600ew wireless	mzik	Internet & Networking	0	15th Nov 2006 04:15 AM
Aztech Homeplug?	The_YongGrand	Internet & Networking	2	27th Jan 2006 03:54 AM

9th Sep 2008, 01:30 PM	#11 (permalink)
mikegas I'm a regular Join Date: 7 May 2008 Posts: 381 Reputation: 206 Rep Power: 3	Modem and router ip address different?

10th Sep 2008, 08:20 AM	#12 (permalink)
fazili74 Newbie Join Date: 8 Sep 2008 Posts: 13 Reputation: 0 Rep Power: 0	Dear Mike, Yes, the router and modem have different address Modem - 192.168.1.1 Router - 192.168.1.2

10th Sep 2008, 10:04 AM	#13 (permalink)
mikegas I'm a regular Join Date: 7 May 2008 Posts: 381 Reputation: 206 Rep Power: 3	If you could go into the modem config page on your explorer to see status of the router if this IP is detected and connected?

10th Sep 2008, 11:17 AM	#14 (permalink)
fazili74 Newbie Join Date: 8 Sep 2008 Posts: 13 Reputation: 0 Rep Power: 0	Dear Mike. How to do that, appreciate your help

11th Sep 2008, 02:05 PM	#17 (permalink)
fazili74 Newbie Join Date: 8 Sep 2008 Posts: 13 Reputation: 0 Rep Power: 0	Dear zy, Yes i connect it to the wan but the problem is the no internet light observed at the router,

15th Sep 2008, 10:25 AM	#20 (permalink)
fazili74 Newbie Join Date: 8 Sep 2008 Posts: 13 Reputation: 0 Rep Power: 0	Dear zy, Nope my ethernet light did not on when i connect to the wan port of the router.