AZTECH DSL600ER + AZTECH WL830RT4, Cannot Connect Wireless to the NET

[syedfadzil]

Broadband provider
ISP/package: STREAMYX
Location: KLANG
Have you called your ISP's helpline?: YES!.... HOPELESS.. NOTHING. I have more faith in this forum

Personal equipment
Modem: AZTECH DSL600ER
Router: AZTECH WL830RT4 (Just recently purchased for home wireless)
Firewall used: Windows Defender

Problem description:

Managed to get detect WIRELESS Network on my Notebook (DELL), but cannot connect to the NET (via Firefox - Page Load Error).

It's OK if connect directly via MODEL DSL Ethernet Cable port. I have surfed this forum for more than 5 HOURS looking for solution, but NO SUCCESS.

If there is such solution available, just paste me its URL.

Really appreciate all the help

[Chai]

You need to configure your wireless router for internet access. Have you configure that already?

[Lacus]

hey, from klang here..maybe can assist you even further XD...TechARP help network

[zy]

2 routers. that explains it.
how are they connected?

if i'm not wrong, the DSL modem does not come with WAN port.
if so, you have to disable the DHCP on the wireless router.
connect both wireless wouter & DSL modem using the LAN port.
do not connect using the WAN port of the wireless router.

[Lacus]

Err, 1st one is a modem right o_O. anyway if you need any more assistance do pm me then

[zy]

Originally Posted by Lacus

Err, 1st one is a modem right o_O. anyway if you need any more assistance do pm me then

yes, it those built-in switch kind of router modem.

[Lacus]

I'm using the same type of modem too (different model) maybe the ethernet cable not connect properly?modem's ethernet should b connect to lan of the wireless router while the wireless router should have 1 ethernet connected to the main pc

[fazili74]

Hi, i,m still not understand about the connection, please help me cause i also got a same problem, cannot access the internet thru router.

Basically i need to connect the cable from modem ethernet to router lan and connect cable from router ethernet to pc.

For modem i'm using Aztech 605E (modem /router) - Already done the bridge mode.
For router i'm using Linksys WRT5G. - Using PPPOE and put the username and pasword

Until today i still not resolve the problem.

For your info, i can connect to internet via modem only not via router.

Other info, when i connected the cable from ethernet to lan port at the router , no light observed at the modem. It is showed my router is not working.

[mikegas]

Connect your modem/internet to the WAN

[fazili74]

Dear Mike. Luckily you put the the picture.

Actually what i mean is router lan is wan port and router ethernet is router lan. Sorry for confusing. So i already put the right cable to the right port but the i still cannot access the internet.

Other info, when i connected the cable from modem ethernet to wan port at the router , no light observed at the modem. Is it showed my router is not working ? or it normal when you used router.

Appreciate your help