Aztech DSL 605 EW

sira12 · 22nd Sep 2008, 01:19 AM

Hi Everybody,

I'm having a problem with my Aztech DSL 605EW Router modem. I've been using it for quite sometime this year and recently the wireless connection failed. During startup of the modem, the wireless LED is ON but when the internet as well as the ADSL LED are ON, the wireless LED is OFF.

According to the manual, the wireless LED is OFF when the Access Point from the router setting is disable. But I've already check quite a number of time that the setting is enabled.

If anybody in this forum having a similar problem, I sure need your help and opinion.

TQVM..

Adrian Wong · 22nd Sep 2008, 05:18 PM

If the wireless AP has been enabled in the router but the WiFi LED is off, then it's likely that the AP is dead. Before you send it back for RMA< just try a hard reset. There's usually a red button on the router that allows you to reset the router to its default settings.

sira12 · 23rd Sep 2008, 01:04 AM

Hi Adrian Wong,

Thank you for your advice. For a second I really hope that you won't mention to me about sending it back for RMA. But sooner or later I must face the fact that I'm actually facing a hardware problem. Anyway about resetting the router, already done that.. a few times actually..but never seem to solve th problem...I really need a miracle..so that I won't have to buy a new one or having to live without surfing the internet while it is away

Anyway..thank you for your reply..

Adrian Wong · 23rd Sep 2008, 01:51 AM

Quote:

Originally Posted by sira12

Hi Adrian Wong,

Thank you for your advice. For a second I really hope that you won't mention to me about sending it back for RMA. But sooner or later I must face the fact that I'm actually facing a hardware problem. Anyway about resetting the router, already done that.. a few times actually..but never seem to solve th problem...I really need a miracle..so that I won't have to buy a new one or having to live without surfing the internet while it is away

Anyway..thank you for your reply..

If your router is still covered by warranty, send it in for RMA while you can. But if it's no longer covered by warranty, you can still send it in for repairs but it will cost you money.

Since WiFi routers are now so cheap, why not just get a new one? Or you can just buy a WiFi AP and hook it up to your router.

As a final resort, you can just use the router's LAN connections.

Chai · 23rd Sep 2008, 05:01 AM

Looks like faulty router to me.

mikegas · 23rd Sep 2008, 12:30 PM

Do try to see if there is any firmware upgrade available. I got problems with my Dlink router the other day.. completely screw-up actually which setup page got corrupted, no wireless. Nearly about to dump it. Then upgrade the firmware, the router was back to norm. Phew.. save a couple of hundred bucks.

sira12 · 23rd Sep 2008, 01:54 PM

I already search for an updated firmware for my router. but the version is the same as the one that I have right now. So I don't think it will help. Anyway, my LAN connection is still ok and using it right now. Just that, since my wireless connection faulty, I have to share my pc with my 3 children in order for them to use it. The distance of my other room is quite far and I have to make a longer LAN cable in order for me to connect to the internet using this router..Anyway, I'm not trying to complain about this just that, I hope I can solve this problem. I know I have no other choice than to send it to the manufacturer or buy a new one (most likely to do this because the LAN connection is still OK). So only left with one choice that is send it to the manufacturer

Anyway thank you all for helping me..If you know anybody with such problem and the manage to fix it themself, do let me know..TQVM..

Ryan · 19th Dec 2008, 11:14 AM

can anyone help me? i need to find an IP to set my CCTV. but dono why i already set it but still cant enter the page anyone can teach me how to do it

Lacus · 20th Dec 2008, 12:37 AM

i think you may need to hardreset the modem then, since you changed the IP and forget it already thus resulting in canot get into that page

22nd Sep 2008, 01:19 AM	#1 (permalink)
sira12 Newbie Join Date: 22 Sep 2008 Posts: 12 Reputation: 0 Rep Power: 0	Aztech DSL 605 EW Hi Everybody, I'm having a problem with my Aztech DSL 605EW Router modem. I've been using it for quite sometime this year and recently the wireless connection failed. During startup of the modem, the wireless LED is ON but when the internet as well as the ADSL LED are ON, the wireless LED is OFF. According to the manual, the wireless LED is OFF when the Access Point from the router setting is disable. But I've already check quite a number of time that the setting is enabled. If anybody in this forum having a similar problem, I sure need your help and opinion. TQVM..

22nd Sep 2008, 05:18 PM	#2 (permalink)
Adrian Wong Da Boss Join Date: 10 Oct 2002 Location: In front of my ASUS F8V notebook! Posts: 32,304 Reputation: 3574 Rep Power: 75	If the wireless AP has been enabled in the router but the WiFi LED is off, then it's likely that the AP is dead. Before you send it back for RMA< just try a hard reset. There's usually a red button on the router that allows you to reset the router to its default settings. __________________ Dr. Adrian Wong Tech ARP \| Blog @ Tech ARP \| The Free Trade Zone DYKT : The only offshore account I have is at the sand bank? We need PROGRAMMERS and TECHNICAL WRITERS! Contact us if you are a hot shot programmer or technical writer! My items for sale : 50x SD Card \| Memory Stick PRO \| Cyclone Energy Saver \| Seiko SS watch \| Tiger/Carlsberg beer jugs \| Travel Speakers \| Motorola V600 \| Nokia N90 SOLD! \| New Lowepro Mini Trekker AW Other items for sale @ the FTZ : Zalman CNPS9500 LED @ $20 \| Zalman CNPS7700 Cu @ $20 \| Zalman CNPS7000 Cu @ $20 \| Swarovski bracelet watches \| Dell 17" LCD \| Hi-Fi speakers \| English DIVX movies \| HP LaserJet toners! \| Office chairs

23rd Sep 2008, 05:01 AM	#5 (permalink)
Chai Administrator Join Date: 6 Oct 2002 Location: Maranello Posts: 27,884 Reputation: 4630 Rep Power: 81	Looks like faulty router to me. __________________ Chai (Contributor & Forum Admin) http://www.techarp.com/

19th Dec 2008, 11:14 AM	#8 (permalink)
Ryan Newbie Join Date: 19 Dec 2008 Posts: 1 Reputation: 0 Rep Power: 0	how to find Aztech ip to set CCTV?? can anyone help me? i need to find an IP to set my CCTV. but dono why i already set it but still cant enter the page anyone can teach me how to do it

20th Dec 2008, 12:37 AM	#9 (permalink)
Lacus Super Active Join Date: 28 Mar 2008 Location: Some gundam factory o.o Posts: 1,302 Reputation: 180 Rep Power: 4	i think you may need to hardreset the modem then, since you changed the IP and forget it already thus resulting in canot get into that page __________________ GUNDAM 00[Intel Xeon E3110 E0 Stock\|Asus Rampage Maximus Formula (Rampage Bios Mod)\|Gigabyte HD4850 512MB GDDR3+T-Rad2\|4x2gb DDR2 1000Mhz OCZ SLI-Ready Edition\|Western Digital WD6400AAKS 640GB\|Creative X-FI XtremeMusic\|Creative Inspire P5800\|Silverstone Strider ST56F\|Acer X233H\|Keyboard=Microsoft Sidewinder X6\|Logitech MX518\|Lian Li PC-7YCF]

23rd Sep 2008, 01:04 AM	#3 (permalink)
sira12 Newbie Join Date: 22 Sep 2008 Posts: 12 Reputation: 0 Rep Power: 0	Hi Adrian Wong, Thank you for your advice. For a second I really hope that you won't mention to me about sending it back for RMA. But sooner or later I must face the fact that I'm actually facing a hardware problem. Anyway about resetting the router, already done that.. a few times actually..but never seem to solve th problem...I really need a miracle..so that I won't have to buy a new one or having to live without surfing the internet while it is away Anyway..thank you for your reply..

23rd Sep 2008, 12:30 PM	#6 (permalink)
mikegas I'm a regular Join Date: 7 May 2008 Posts: 464 Reputation: 206 Rep Power: 4	Do try to see if there is any firmware upgrade available. I got problems with my Dlink router the other day.. completely screw-up actually which setup page got corrupted, no wireless. Nearly about to dump it. Then upgrade the firmware, the router was back to norm. Phew.. save a couple of hundred bucks.

23rd Sep 2008, 01:54 PM	#7 (permalink)
sira12 Newbie Join Date: 22 Sep 2008 Posts: 12 Reputation: 0 Rep Power: 0	I already search for an updated firmware for my router. but the version is the same as the one that I have right now. So I don't think it will help. Anyway, my LAN connection is still ok and using it right now. Just that, since my wireless connection faulty, I have to share my pc with my 3 children in order for them to use it. The distance of my other room is quite far and I have to make a longer LAN cable in order for me to connect to the internet using this router..Anyway, I'm not trying to complain about this just that, I hope I can solve this problem. I know I have no other choice than to send it to the manufacturer or buy a new one (most likely to do this because the LAN connection is still OK). So only left with one choice that is send it to the manufacturer Anyway thank you all for helping me..If you know anybody with such problem and the manage to fix it themself, do let me know..TQVM..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AZTECH DSL600ER + AZTECH WL830RT4, Cannot Connect Wireless to the NET	syedfadzil	Internet & Networking	21	15th Sep 2008 03:12 PM
Modem Aztech cannot log in	F55-18	Internet & Networking	2	16th Nov 2007 05:19 PM
Aztech DSL500EW restart	right	General Hardware	5	2nd Jul 2007 10:11 PM
Aztech DSL600EW	gdi1986	General Hardware	1	4th Jul 2006 11:51 PM
Aztech Homeplug?	The_YongGrand	Internet & Networking	2	27th Jan 2006 03:54 AM