What is HT Voltage for?

cfree1961 · 12th Mar 2007, 09:58 PM

I have an Asus A8N-SLI Premium mobo and it has HT voltage setting in the Jumper free config area of the bios what is this for? default is 1.2V and the other setting is 1.25V any adavntage or use to goto the higher setting?
Thanks!

neverthar · 12th Mar 2007, 10:08 PM

I my personal experience, that regulates the voltage of the Hyper Transport link as since you don't have an MCH, that becomes your FSB link. You only need to raise it if in the event you decide to overclock

ZuePhok · 12th Mar 2007, 10:21 PM

even if u overclock, you do not really need to raise the voltage of the HTT.

always try to keep it at 2000MHz (via HTT multiplier) and you will be fine. the memory pipe no longer resides on the HTT. it's connected to the K8 ondie memory controller through its dedicated bus so there is no point in increasing your HTT since higher HTT doesnt bring higher memory bandwidth to your processor.

neverthar · 13th Mar 2007, 12:31 AM

Indeed true but when under extreme overclocks the HTT bus itself might be overstressed due to changes in timings (Seriously, I still think the nForce 4 remains the most complicated to optimise) that at times, raising the voltage does help to stabilise the system

cfree1961 · 13th Mar 2007, 06:05 AM

Thank you all for the reply! Looks to be best for me to leave alone!

Again thanks for your replies and time!

ChampionLLY · 13th Mar 2007, 11:51 PM

from my personal o/c-ing experience with abit an8 fata1lty + opty146,
no matter how much vHT or vNB i pump in, the HTLink doesnt stablize beyond 1380Mhz

empire23 · 14th Mar 2007, 12:49 AM

Well, it shouldn't be that much of an issue unless you wish to OC the HTT (NB to proc interconnect) together with the memory. Most of us usually just turn down the HTT multiplier...less shit to deal with when OCing lol.

ZuePhok · 14th Mar 2007, 01:01 AM

Quote:

Originally Posted by ChampionLLY

from my personal o/c-ing experience with abit an8 fata1lty + opty146,
no matter how much vHT or vNB i pump in, the HTLink doesnt stablize beyond 1380Mhz

and why would you want to run it higher than 1000MHz?

neverthar · 14th Mar 2007, 01:19 PM

Which is what I'm wondering since usually people down grade the multi from 5 to any multi which is close to targetted FSB.

HTT Multi x Desired FSB = close to 1000Mhz (pointless to exceed)

ZuePhok · 14th Mar 2007, 05:29 PM

at 1000MHz (2000MHz effective), u get 8GB/s of bandwidth (full dupley. 4GB each way).

in what world can a desktop user use up to 8gb/s of bandwidth? you can even lower it to 600MHz and still feel nothing. there are a couple of sites that have done these tests before. google it. hardocp is one of them i think..

12th Mar 2007, 09:58 PM	#1 (permalink)
cfree1961 Newbie Join Date: 18 Jan 2003 Posts: 7 Reputation: 0 Rep Power: 0	What is HT Voltage for? I have an Asus A8N-SLI Premium mobo and it has HT voltage setting in the Jumper free config area of the bios what is this for? default is 1.2V and the other setting is 1.25V any adavntage or use to goto the higher setting? Thanks!

12th Mar 2007, 10:08 PM	#2 (permalink)
neverthar I'm a regular Join Date: 17 Oct 2006 Posts: 269 Reputation: 176 Rep Power: 3	I my personal experience, that regulates the voltage of the Hyper Transport link as since you don't have an MCH, that becomes your FSB link. You only need to raise it if in the event you decide to overclock __________________ Only available by PM. Will help if possible Wanted: 2nd hand good condition IS lense for Canon 400D

12th Mar 2007, 10:21 PM	#3 (permalink)
ZuePhok Hold me back! I can't stop posting!!! Join Date: 16 Dec 2002 Location: Floating Island Of Mandango Posts: 8,510 Reputation: 2724 Rep Power: 41	even if u overclock, you do not really need to raise the voltage of the HTT. always try to keep it at 2000MHz (via HTT multiplier) and you will be fine. the memory pipe no longer resides on the HTT. it's connected to the K8 ondie memory controller through its dedicated bus so there is no point in increasing your HTT since higher HTT doesnt bring higher memory bandwidth to your processor. __________________ DYKT: Our DNA can expired? Thank god my science class wasn't taught by Pak Lah

13th Mar 2007, 12:31 AM	#4 (permalink)
neverthar I'm a regular Join Date: 17 Oct 2006 Posts: 269 Reputation: 176 Rep Power: 3	Indeed true but when under extreme overclocks the HTT bus itself might be overstressed due to changes in timings (Seriously, I still think the nForce 4 remains the most complicated to optimise) that at times, raising the voltage does help to stabilise the system __________________ Only available by PM. Will help if possible Wanted: 2nd hand good condition IS lense for Canon 400D

14th Mar 2007, 12:49 AM	#7 (permalink)
empire23 BRB. Attacking Russia Join Date: 4 Feb 2006 Location: Ze Fatherland Posts: 278 Reputation: 390 Rep Power: 6	Well, it shouldn't be that much of an issue unless you wish to OC the HTT (NB to proc interconnect) together with the memory. Most of us usually just turn down the HTT multiplier...less shit to deal with when OCing lol. __________________ I'm in Ur Forums, Spamming Ur Boards.

13th Mar 2007, 06:05 AM	#5 (permalink)
cfree1961 Newbie Join Date: 18 Jan 2003 Posts: 7 Reputation: 0 Rep Power: 0	Thank you all for the reply! Looks to be best for me to leave alone! Again thanks for your replies and time!

13th Mar 2007, 11:51 PM	#6 (permalink)
ChampionLLY News Writer Join Date: 23 Apr 2006 Posts: 1,150 Reputation: 716 Rep Power: 11	from my personal o/c-ing experience with abit an8 fata1lty + opty146, no matter how much vHT or vNB i pump in, the HTLink doesnt stablize beyond 1380Mhz

14th Mar 2007, 01:19 PM	#9 (permalink)
neverthar I'm a regular Join Date: 17 Oct 2006 Posts: 269 Reputation: 176 Rep Power: 3	Which is what I'm wondering since usually people down grade the multi from 5 to any multi which is close to targetted FSB. HTT Multi x Desired FSB = close to 1000Mhz (pointless to exceed) __________________ Only available by PM. Will help if possible Wanted: 2nd hand good condition IS lense for Canon 400D

14th Mar 2007, 05:29 PM	#10 (permalink)
ZuePhok Hold me back! I can't stop posting!!! Join Date: 16 Dec 2002 Location: Floating Island Of Mandango Posts: 8,510 Reputation: 2724 Rep Power: 41	at 1000MHz (2000MHz effective), u get 8GB/s of bandwidth (full dupley. 4GB each way). in what world can a desktop user use up to 8gb/s of bandwidth? you can even lower it to 600MHz and still feel nothing. there are a couple of sites that have done these tests before. google it. hardocp is one of them i think.. __________________ DYKT: Our DNA can expired? Thank god my science class wasn't taught by Pak Lah