Lapped my IHS on a Q6600 (pics and results) - Page 3

graysky · 10th Nov 2007, 09:45 AM

Quote:

Originally Posted by Max_87

It only gave me 1-2C improvement in temperature, not very impressive. I already knew when I started lapping the IHS, because the unevenness of the surface isn't actually that bad. In fact it only took me less than 1 hour to even it out.

Did you do the HS too...?

Max_87 · 11th Nov 2007, 12:11 PM

Mine is watercooled, using D-Tek FuZion. It's already flat, lapping it will only make it worse

ZuePhok · 11th Nov 2007, 12:20 PM

Quote:

Originally Posted by Max_87

Mine is watercooled, using D-Tek FuZion. It's already flat, lapping it will only make it worse

try to lap until the IHS is gone

Max_87 · 11th Nov 2007, 01:21 PM

Quote:

Originally Posted by ZuePhok

try to lap until the IHS is gone

I'd rather pop the IHS off straight away

ZuePhok · 11th Nov 2007, 03:16 PM

Quote:

Originally Posted by Max_87

I'd rather pop the IHS off straight away

train finger muscle

Adrian Wong · 11th Nov 2007, 03:35 PM

Quote:

Originally Posted by Max_87

I'd rather pop the IHS off straight away

Wasn't that what you did last time... and killed your processor???

PsYkHoTiK · 11th Nov 2007, 04:48 PM

Quote:

Originally Posted by ZuePhok

train finger muscle

Lapping = Fapping = Increase powah

Max_87 · 12th Nov 2007, 02:00 AM

Quote:

Originally Posted by Adrian Wong

Wasn't that what you did last time... and killed your processor???

I'll make sure it won't happen if I do that again

Quote:

Originally Posted by PsYkHoTiK

Lapping = Fapping = Increase powah

fap powah!

Chai · 12th Nov 2007, 08:32 AM

Removing Intel IHS is almost the most insane or inane thing you can do!

You will most certainly kill the processor without using a torch, it's not like otrch won't kill the processor either!

Max_87 · 12th Nov 2007, 02:41 PM

LOL those XS guys poped the IHS off by sticking the processor in a cooking pot with TIM and heat it up

and it survived unlike the attempt by one VR-Zone guy who uses heat gun. Crazy fellas

11th Nov 2007, 12:11 PM	#22 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: the land of bandwidth cap Posts: 11,430 Reputation: 2090 Rep Power: 38	Mine is watercooled, using D-Tek FuZion. It's already flat, lapping it will only make it worse __________________ Max_87 Tech ARP http://www.techarp.com Dell Studio 15 / P7350 / 3GB DDR2 / Radeon HD 3450 / 250GB 7200RPM / 15" @ 1920x1200 E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

12th Nov 2007, 08:32 AM	#29 (permalink)
Chai Administrator Join Date: 6 Oct 2002 Location: Maranello Posts: 27,884 Reputation: 4630 Rep Power: 81	Removing Intel IHS is almost the most insane or inane thing you can do! You will most certainly kill the processor without using a torch, it's not like otrch won't kill the processor either! __________________ Chai (Contributor & Forum Admin) http://www.techarp.com/

12th Nov 2007, 02:41 PM	#30 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: the land of bandwidth cap Posts: 11,430 Reputation: 2090 Rep Power: 38	LOL those XS guys poped the IHS off by sticking the processor in a cooking pot with TIM and heat it up and it survived unlike the attempt by one VR-Zone guy who uses heat gun. Crazy fellas __________________ Max_87 Tech ARP http://www.techarp.com Dell Studio 15 / P7350 / 3GB DDR2 / Radeon HD 3450 / 250GB 7200RPM / 15" @ 1920x1200 E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lapped by Ultra-120 Extreme (pics and results)	graysky	Overclocking, Cooling & Modding	13	16th Jul 2008 05:26 AM