Wolfdale overclocking thread!

Max_87 · 3rd May 2008, 08:52 AM

Just got my E8400 yesterday

VID is 0.9250v, this is so far the lowest I've seen myself

Just finished testing 4GHz @ 1.24v

My E6850 can't even do this with over 1.65v

Now testing 4.1GHz @ 1.27v

Hopefully my ram can handle the speed.

Trinity · 3rd May 2008, 09:43 AM

Damn!!! I want one!!!

What does it score at super pi 1 meg @ that speed?

Max_87 · 3rd May 2008, 10:09 AM

Not sure, I haven't tested Super PI yet, but I think should be around 11-12 seconds.

1.27v isn't enough, so I bumped the voltage up just a tiny bit. Now testing 4.1GHz @ 1.28v, so far so good

ZuePhok · 3rd May 2008, 12:03 PM

does your mobo have loadline calibration?

On mine, if loadline calibration is disabled, I need 1.275. otherwise 1.25v is enough to hit 4.05.

that's max my system can go

RAM is limiting me

Chai · 3rd May 2008, 01:42 PM

Quote:

Originally Posted by Max_87

Just got my E8400 yesterday

VID is 0.9250v, this is so far the lowest I've seen myself

Just finished testing 4GHz @ 1.24v

My E6850 can't even do this with over 1.65v

Now testing 4.1GHz @ 1.27v

Hopefully my ram can handle the speed.

Try getting the latest CPUZ. Should detect the correct voltage...

Chai · 3rd May 2008, 03:19 PM

FAPFAPFAP!!!

Max_87 · 3rd May 2008, 03:31 PM

Hm... I downloaded the latest version of CPU-Z, it shows slightly lower voltage, around 0.01-0.02v lower.

Priming at 4.2GHz @ 1.32v at the moment

FAPFAPFAP!

Max_87 · 3rd May 2008, 03:36 PM

Quote:

Originally Posted by ZuePhok

does your mobo have loadline calibration?

On mine, if loadline calibration is disabled, I need 1.275. otherwise 1.25v is enough to hit 4.05.

that's max my system can go

RAM is limiting me

I don't think so. I did what Chai said, the latest version of CPU-Z is giving me ~1.23v at 4GHz while the older version shows 1.24v.

Seems like my ram is doing fine at 467MHz.

Digerati · 3rd May 2008, 04:15 PM

I got mine to 4.0 GHz at @ 1.35 V, but I can't find the screenies I took back then. Right now, I'm at 3.6 GHz no voltage increase.

Max_87 · 3rd May 2008, 04:46 PM

Seems like the previous 4.1GHz @ 1.27v test is limited by my NB/RAM, I couldn't get it to prime stable even at 1.29v, but now my E8400 doing fine at 4.2GHz with 1.32v. I had bumped my MCH and RAM voltage up a notch when I started testing 4.2GHz.

3rd May 2008, 08:52 AM	#1 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: the land of bandwidth cap Posts: 11,430 Reputation: 2090 Rep Power: 38	Wolfdale overclocking thread! Just got my E8400 yesterday VID is 0.9250v, this is so far the lowest I've seen myself Just finished testing 4GHz @ 1.24v My E6850 can't even do this with over 1.65v Now testing 4.1GHz @ 1.27v Hopefully my ram can handle the speed. __________________ Max_87 Tech ARP http://www.techarp.com Dell Studio 15 / P7350 / 3GB DDR2 / Radeon HD 3450 / 250GB 7200RPM / 15" @ 1920x1200 E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F Last edited by Max_87 : 15th Dec 2008 at 03:12 PM.

3rd May 2008, 09:43 AM	#2 (permalink)
Trinity Little Kiki Join Date: 5 Jan 2003 Location: Ohio,usa Posts: 7,131 Reputation: 5836 Rep Power: 72	Damn!!! I want one!!! What does it score at super pi 1 meg @ that speed? __________________ (\__/) (-. - ) (> < )

3rd May 2008, 10:09 AM	#3 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: the land of bandwidth cap Posts: 11,430 Reputation: 2090 Rep Power: 38	Not sure, I haven't tested Super PI yet, but I think should be around 11-12 seconds. 1.27v isn't enough, so I bumped the voltage up just a tiny bit. Now testing 4.1GHz @ 1.28v, so far so good __________________ Max_87 Tech ARP http://www.techarp.com Dell Studio 15 / P7350 / 3GB DDR2 / Radeon HD 3450 / 250GB 7200RPM / 15" @ 1920x1200 E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

3rd May 2008, 12:03 PM	#4 (permalink)
ZuePhok Hold me back! I can't stop posting!!! Join Date: 16 Dec 2002 Location: Floating Island Of Mandango Posts: 8,732 Reputation: 3155 Rep Power: 46	does your mobo have loadline calibration? On mine, if loadline calibration is disabled, I need 1.275. otherwise 1.25v is enough to hit 4.05. that's max my system can go RAM is limiting me __________________ my motto: poison first, think later.

3rd May 2008, 03:31 PM	#7 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: the land of bandwidth cap Posts: 11,430 Reputation: 2090 Rep Power: 38	Hm... I downloaded the latest version of CPU-Z, it shows slightly lower voltage, around 0.01-0.02v lower. Priming at 4.2GHz @ 1.32v at the moment FAPFAPFAP! __________________ Max_87 Tech ARP http://www.techarp.com Dell Studio 15 / P7350 / 3GB DDR2 / Radeon HD 3450 / 250GB 7200RPM / 15" @ 1920x1200 E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

3rd May 2008, 04:15 PM	#9 (permalink)
Digerati Just Started Join Date: 15 Apr 2008 Posts: 45 Reputation: 0 Rep Power: 0	I got mine to 4.0 GHz at @ 1.35 V, but I can't find the screenies I took back then. Right now, I'm at 3.6 GHz no voltage increase.

3rd May 2008, 04:46 PM	#10 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: the land of bandwidth cap Posts: 11,430 Reputation: 2090 Rep Power: 38	Seems like the previous 4.1GHz @ 1.27v test is limited by my NB/RAM, I couldn't get it to prime stable even at 1.29v, but now my E8400 doing fine at 4.2GHz with 1.32v. I had bumped my MCH and RAM voltage up a notch when I started testing 4.2GHz. __________________ Max_87 Tech ARP http://www.techarp.com Dell Studio 15 / P7350 / 3GB DDR2 / Radeon HD 3450 / 250GB 7200RPM / 15" @ 1920x1200 E8600 @ 4.4GHz 1.36v / Asus P5E3 Deluxe / 2x2GB DDR3 / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
C2D Overclocking All-In-1 Thread	Dashken	Overclocking, Cooling & Modding	32	25th Jun 2007 02:53 PM
ED#45 : Intel Updates - Wolfdale, Penryn & CPU Graphics	Dashken	Reviews & Articles	0	12th May 2007 09:30 PM
overclocking... what else...	sham255	Overclocking, Cooling & Modding	34	4th Dec 2002 07:54 PM