HELP QX6850 REBOOTS-FREEZES on screen - Page 3

Rraven · 24th May 2008, 09:58 PM

You are prob correct Max, I was off still searching for information on this, I came across this guide. While OMG may not want to OC his computer working with this guide and adjusting things as Tony outlines should be able to get him stable even at stock speeds.

Though it is written concerning the DFI 680i and the Conroe, it should be roughly the same for the eVGA as far as working with the voltages by area.

DFI LanParty NF680i LT SLI-T2R: Preliminary Setup Guide - The Tech Repository Forums

He may also need to register with the site in order to view it.

Max_87 · 24th May 2008, 10:19 PM

I never asked him to overclock his processor.

Rraven · 24th May 2008, 10:31 PM

Quote:

Originally Posted by Max_87

I never asked him to overclock his processor.

I understand that none have asked him to do so. My point in that link to Tony's guide it to use as a Reference as to what Voltages he may need to adjust. Thereby gaining stability using the Quad through the bios. As you stated adjusting just Vcore may do it.

Whether he/she decides to OC at a later time is purely up to OMG

Max_87 · 24th May 2008, 10:34 PM

Oops, I apologize, I did not read your post properly.

Rraven · 24th May 2008, 10:40 PM

Its all good, many a time i have done the same thing and had to use

also.

24th May 2008, 10:19 PM	#22 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: Sarawak, Malaysia. Posts: 11,261 Reputation: 2024 Rep Power: 37	I never asked him to overclock his processor. __________________ Max_87 Tech ARP http://www.techarp.com P4 630 / Abit IP35 Pro / G.Skill F2-8000CL5-4GBPQ / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

24th May 2008, 10:34 PM	#24 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: Sarawak, Malaysia. Posts: 11,261 Reputation: 2024 Rep Power: 37	Oops, I apologize, I did not read your post properly. __________________ Max_87 Tech ARP http://www.techarp.com P4 630 / Abit IP35 Pro / G.Skill F2-8000CL5-4GBPQ / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Consequences of using cheap Screen Protector ?	karhoe	Notebooks & Mobile Devices	12	25th Apr 2007 11:46 AM
Problems surfacing with iPod Nano screen!	Dashken	News	6	28th Sep 2005 10:31 PM

24th May 2008, 09:58 PM	#21 (permalink)
Rraven Just Started Join Date: 13 May 2008 Location: Blairsville, GA Posts: 50 Reputation: 129 Rep Power: 0	You are prob correct Max, I was off still searching for information on this, I came across this guide. While OMG may not want to OC his computer working with this guide and adjusting things as Tony outlines should be able to get him stable even at stock speeds. Though it is written concerning the DFI 680i and the Conroe, it should be roughly the same for the eVGA as far as working with the voltages by area. DFI LanParty NF680i LT SLI-T2R: Preliminary Setup Guide - The Tech Repository Forums He may also need to register with the site in order to view it.

24th May 2008, 10:40 PM	#25 (permalink)
Rraven Just Started Join Date: 13 May 2008 Location: Blairsville, GA Posts: 50 Reputation: 129 Rep Power: 0	Its all good, many a time i have done the same thing and had to use also.