The North Bridge Wet-Sanding Guide Posted! - Page 4

TungstenBoy · 24th Dec 2003, 01:12 AM

hope he can repair his mobo.......

any more guide zuephok?????

Max_87 · 24th Dec 2003, 07:43 AM

i bet there is no difference in temperatures the lapped/stock northbridge

Chai · 24th Dec 2003, 09:37 AM

You will definitely see the difference in temperature. But whether it affects the overclocking is another matter...

thale02896 · 25th Dec 2003, 02:22 AM

I think it was a good article but would have liked a little more information on what type of sanding block you used. I've seen other how to's that used a wooden block with a very small mirror attached to ensure flatness and would like to know how you set your block up.

wildfrogman · 14th Jan 2004, 04:23 PM

Hey, It looks like the stock nf7-s northbridge cooler is on the video card in the review? How good is it compared to the small gold heatsinks in performance? Also, I have sold a motherboard I modded with heatsinks stuck on the mosfets and the person didnt care~actually liked the heatsinks so you should always ask first and see if they want the heatsinks on the board or not.

24th Dec 2003, 01:12 AM	#31 (permalink)
TungstenBoy Hold me back! I can't stop posting!!! Join Date: 5 May 2003 Posts: 6,260 Reputation: 0 Rep Power: 12	hope he can repair his mobo....... any more guide zuephok????? __________________ lowyat forum got a dictator god admin...... <^>(>.&lt<^> hieeeee se7en!!!!! .....come check check again?????

24th Dec 2003, 07:43 AM	#32 (permalink)
Max_87 h@x! Join Date: 11 Aug 2003 Location: Sarawak, Malaysia. Posts: 11,288 Reputation: 2024 Rep Power: 37	i bet there is no difference in temperatures the lapped/stock northbridge __________________ Max_87 Tech ARP http://www.techarp.com P4 630 / Abit IP35 Pro / G.Skill F2-8000CL5-4GBPQ / Radeon X1800 / Barracuda 7200.9 120GB / 7200.10 320GB x2 / Caviar SE16 WD5000AAKS / WD6400AAKS x2 / Dell 2007FP x2 / Silverstone ST56F

24th Dec 2003, 09:37 AM	#33 (permalink)
Chai Administrator Join Date: 6 Oct 2002 Location: Maranello Posts: 26,757 Reputation: 3984 Rep Power: 72	You will definitely see the difference in temperature. But whether it affects the overclocking is another matter... __________________ Chai (Contributor & Forum Admin) http://www.techarp.com/

25th Dec 2003, 02:22 AM	#34 (permalink)
thale02896 Newbie Join Date: 25 Dec 2003 Posts: 1 Reputation: 0 Rep Power: 0	I think it was a good article but would have liked a little more information on what type of sanding block you used. I've seen other how to's that used a wooden block with a very small mirror attached to ensure flatness and would like to know how you set your block up.

14th Jan 2004, 04:23 PM	#35 (permalink)
wildfrogman Warming up Join Date: 2 Dec 2002 Location: USA Posts: 124 Reputation: 0 Rep Power: 7	Hey, It looks like the stock nf7-s northbridge cooler is on the video card in the review? How good is it compared to the small gold heatsinks in performance? Also, I have sold a motherboard I modded with heatsinks stuck on the mosfets and the person didnt care~actually liked the heatsinks so you should always ask first and see if they want the heatsinks on the board or not.