Add another HDD?

Ishtim · 11th Mar 2008, 08:31 PM

O' gurus of the chips, please loan us your wisdom to help thy friend in need.... actually my father's machine

He is trying to add another HDD under Windoze 2000.

Quote:

Originally Posted by Ishtim's Dad

I’ve been trying to install another IDE hard drive in addition to the one I have. The existing drive connected to IDE1 is a 40g WD400BB and the add-on is a 160g WD1600JB. When I start the computer with the 40g drive jumper set as a master and the 160g drive jumper set to a slave (or the reverse) the BIOS hangs it up before even getting to windows. I am unable to get to the BIOS setup screen until I remove one of the drives.

The motherboard is an INTEL D865GVHZ with BIOS version 24. The last update was 25, but there is nothing in the release notes about a fix related to this.

For troubleshooting:

1. I have removed the 80 wire IDE2 cable and the associated DVD drive and have swapped this cable with IDE1 in case of a wire breakage. This had no effect.

2. A visual inspection of all pins and connector did not uncover any problems

3. I have installed another 40g in place of the 160g and the two 40g drives work fine together. Also tried the extra 40g drive with the 160g and the hang up recurred.

4. The 160g drive was temporarily installed in another computer in the same configuration except with an existing 80g as the master and the drives worked okay.

5. The Bios works properly with only one drive installed, either the 40g or the 160g with the jumpers set to single drive.

6. Varied the jumper setting to the different combinations to determine the effect: With the jumpers set to slave/slave or master/master or single/master or single/single the Bios continues and shows that the 160g drive is available, but no 40g drive. All other combinations hang up the BIOS.

Can you mix 24 (older 40GB drive) and 48 bit (newer 160GB drive) Logical Block address' drives on the same system?

Trinity · 11th Mar 2008, 11:59 PM

Try a different power molexe conector.

Chai · 12th Mar 2008, 08:02 AM

Quote:

Originally Posted by Trinity

Try a different power molexe conector.

Try setting both drives to cable select jumper, instead of Master and Slave. WD are usually problematic when you fix the master and slave.

peaz · 12th Mar 2008, 08:41 AM

Another option is to slave the DVD drive to the 40GB HD on the primary IDE and leave the 160GB to be a master on the secondary IDE.

Primary IDE Master : 40GB
Primary IDE SLave : DVD

Secondary IDE Master: 160GB
Secondary IDE Slave: none

Ishtim · 12th Mar 2008, 07:59 PM

Thanks guys! I'll pass it on and let you know how it goes!

Adrian Wong · 12th Mar 2008, 09:29 PM

Quote:

Originally Posted by Chai

Try setting both drives to cable select jumper, instead of Master and Slave. WD are usually problematic when you fix the master and slave.

Yeah, that's a great idea. Even CD-ROM drives have a problem with Master / Slave. These days, I prefer to simply use Cable Select, if I cannot give each IDE drive its own cable / IDE channel.

Ishtim · 12th Mar 2008, 10:12 PM

Quote:

Originally Posted by Ishtim's Dad

No good. CS approach hangs up and so does the combo in 2 (peaz's suggestion). By the way, the correct Secondary IDE would be jumpered Single. Of course I tried single, than master then slave. None worked.

My feeling is that it has to be the motherboard not the HD. The 160g works fine in your machine and the 120g works fine in the INTEL. So what I am going to do is blow off the 160g relative to the INTEL and use the 120g. It just represents ghosting two machines instead of one. However I might try to update the motherboard BIOS to the latest update just to make sure that INTEL didn’t forget to document the fix Anyway, thanks for attempting to come up with a fix.

Adrian Wong · 12th Mar 2008, 11:19 PM

IMHO, always a good idea to update the BIOS. I fixed more than a few odd issues with BIOS updates that did not list them as fixes.

Adrian Wong · 12th Mar 2008, 11:20 PM

Oh btw, it's always a good idea to use the 80-conductor IDE cable, instead of the older 40-conductor cable.

miahman · 13th May 2008, 07:44 PM

does the master/slave setting allow you to overcome the limitations of your mobo.

i.e if a otherboard only supports 6 sata devices. would you be able to set one as a slave to the other and use 7?

11th Mar 2008, 11:59 PM	#2 (permalink)
Trinity Little Kiki Join Date: 5 Jan 2003 Location: Ohio,usa Posts: 6,597 Reputation: 4828 Rep Power: 60	Try a different power molexe conector. __________________ E6600, P5B-D, 1Gbx2 Crucial PC2-8500, 7600GT, WD 500GbHDD Conroe Bay-Bee! (\__/) (-. - ) (> < ) Vsya Moya Lyubov' http://www.youtube.com/watch?v=zo5n0HwaRmQ

12th Mar 2008, 08:41 AM	#4 (permalink)
peaz ARP Webmaster Join Date: 13 Oct 2002 Location: http://atpeaz.placidthoughts.com/ Posts: 8,435 Reputation: 1633 Rep Power: 30	Another option is to slave the DVD drive to the 40GB HD on the primary IDE and leave the 160GB to be a master on the secondary IDE. Primary IDE Master : 40GB Primary IDE SLave : DVD Secondary IDE Master: 160GB Secondary IDE Slave: none __________________ Ken Ng Tech ARP Visit my web gallery - Ken's Digital Canvas Shoot and Earn Money from Stock Photography Sterling@PJ Community Forums

12th Mar 2008, 11:19 PM	#8 (permalink)
Adrian Wong Da Boss Join Date: 10 Oct 2002 Location: In front of my BenQ Joybook 7000 notebook! Posts: 29,102 Reputation: 2830 Rep Power: 63	IMHO, always a good idea to update the BIOS. I fixed more than a few odd issues with BIOS updates that did not list them as fixes. __________________ Dr. Adrian Wong Tech ARP \| Blog @ Tech ARP \| The Free Trade Zone DYKT : The only offshore account I have is at the sand bank? Keep Tech ARP free! Visit our sponsors! We need PROGRAMMERS and TECHNICAL WRITERS! Contact us if you are a hot shot programmer or technical writer! My items for sale : 50x SD Card \| Memory Stick PRO \| Cyclone Energy Saver \| Seiko SS watch \| Tiger/Carlsberg beer jugs \| Travel Speakers \| Motorola V600 \| Nokia N90 SOLD! \| New Lowepro Mini Trekker AW Other items for sale @ the FTZ : Zalman CNPS9500 LED @ $20 \| Zalman CNPS7700 Cu @ $20 \| Zalman CNPS7000 Cu @ $20 \| Swarovski bracelet watches \| Dell 17" LCD \| Hi-Fi speakers \| English DIVX movies \| HP LaserJet toners! \| Office chairs

12th Mar 2008, 11:20 PM	#9 (permalink)
Adrian Wong Da Boss Join Date: 10 Oct 2002 Location: In front of my BenQ Joybook 7000 notebook! Posts: 29,102 Reputation: 2830 Rep Power: 63	Oh btw, it's always a good idea to use the 80-conductor IDE cable, instead of the older 40-conductor cable. __________________ Dr. Adrian Wong Tech ARP \| Blog @ Tech ARP \| The Free Trade Zone DYKT : The only offshore account I have is at the sand bank? Keep Tech ARP free! Visit our sponsors! We need PROGRAMMERS and TECHNICAL WRITERS! Contact us if you are a hot shot programmer or technical writer! My items for sale : 50x SD Card \| Memory Stick PRO \| Cyclone Energy Saver \| Seiko SS watch \| Tiger/Carlsberg beer jugs \| Travel Speakers \| Motorola V600 \| Nokia N90 SOLD! \| New Lowepro Mini Trekker AW Other items for sale @ the FTZ : Zalman CNPS9500 LED @ $20 \| Zalman CNPS7700 Cu @ $20 \| Zalman CNPS7000 Cu @ $20 \| Swarovski bracelet watches \| Dell 17" LCD \| Hi-Fi speakers \| English DIVX movies \| HP LaserJet toners! \| Office chairs

12th Mar 2008, 07:59 PM	#5 (permalink)
Ishtim Super Moderator Join Date: 14 May 2003 Location: Alabama, USA Posts: 3,586 Reputation: 2567 Rep Power: 34	Thanks guys! I'll pass it on and let you know how it goes!

13th May 2008, 07:44 PM	#10 (permalink)
miahman I'm a regular Join Date: 20 Apr 2008 Posts: 272 Reputation: 116 Rep Power: 2	does the master/slave setting allow you to overcome the limitations of your mobo. i.e if a otherboard only supports 6 sata devices. would you be able to set one as a slave to the other and use 7?