Discussion in 'BIOS Optimization Guide (BOG)' started by dundee_stokie, Dec 8, 2011.

  1. dundee_stokie

    dundee_stokie Newbie

    "DQS training failed on previous boot, Revert to slower DRAM speed"
    Press F1 to resume.

    If I reboot I don\'t get the message but if I turn off the computer for a while and
    turn it on, I get the same error message. Something is telling me that G-Skill is
    not suited to an AMD platform ?

    Does anyone share a similar experience with this DQS training message ?
  2. Adrian Wong

    Adrian Wong Da Boss Staff Member

    See Tech ARP - DQS Training Control

    I recommend you go into the BIOS and disable DQS Training Control by selecting Skip DQS. If you are overclocking though, then you might want to reduce the clock speed a little and see if that solves the problem.

Share This Page