Impressive overclock from celeron D

Discussion in 'Overclocking, Cooling & Modding' started by ALstonLoong, Feb 24, 2006.

  1. ALstonLoong

    ALstonLoong Newbie

    1 person likes this.
  2. zy

    zy Staff Member

    to me it looked like Celeron D at the same clock speed as Pentium 4 is slower ..

    it just can have higher clock speed to beat a Pentium 4 :p
  3. ALstonLoong

    ALstonLoong Newbie

    yup but depends on the price of celeron d.If the chip is dirt cheap it will be good for value user, simply overclock to get p4 performance.
  4. zy

    zy Staff Member

    wont heat be another issue to get a more expensive cooling ? :haha:
  5. ALstonLoong

    ALstonLoong Newbie

    if u read the article, it says the heat is not really a big deal.
  6. PowerSlide

    PowerSlide Just Started

    cedar mill is getting good each day

    budget chip to oc max :beer:
  7. Papercut

    Papercut Newbie

    5GHz :faint:

    All right, bring on Conroe :twisted:

    What cooling were they using for 5GHz and what were the temps like?
    I can't be bothered installing Chinese character support and even then I think I'll be struggling for an hour just to figure out one sentence :haha:
  8. ALstonLoong

    ALstonLoong Newbie

    no idea wat kind of heatsink they are using in that test, seems like a coolermaster :think: with power consumption of 69w i dont think u need a costy heatsink. Lets wait for a better review :thumb:
  9. Max_87

    Max_87 huehuehue

    Air cooling :mrgreen:

    Without increasing the voltage they managed to bring that celery to 4.15GHz :mrgreen: After +0.2v the celery hits 5GHz.
  10. Chai

    Chai Administrator Staff Member

    But that Celery needs almost 1GHz higher to beat P4, and P4 isn't really that fast...

    I'm sticking with A64 for now...
  11. Max_87

    Max_87 huehuehue

    Celery needs at least 4GHz+ to beat a A64 3000+/3200+ at stock if I remember correctly :faint:
  12. Papercut

    Papercut Newbie

    Like I said, bring on Conroe :mrgreen:
    To me, all this is pretty much just a prelude. (Presler, Cedar Mill, Yonah)
  13. Papercut

    Papercut Newbie

  14. wiLL*lianG

    wiLL*lianG Newbie

    its really an impresive result @@"
    and it easily went up to 4.15Ghz with 166x25 .. phew
  15. ALstonLoong

    ALstonLoong Newbie

    the performance and low power consumption looks like a downgrade northwood with 65nm to me; which is great ofcourse :thumb:

Share This Page