Intel motherboard suddenly stops

Discussion in 'Processors, Motherboards & Memory' started by zillah, Aug 31, 2008.

  1. zillah

    zillah Newbie

    I have got this motherboard : Intel Desktop Board D860PERL,,,,,,I just tried to change the case for it, now it does not work.

    I unplug all the cables (CD and HD ,,the FAN does not spin (some time just start to spin and then stops) . I removed the cmos battery does not fix the issue.

    I tried another power supply same thing still going on.

    I have got another motherboard it behaved same thing with both power supplies? I do not know if I did something wrong with cablings ?

    For the CPU fan to work (testing) do we need to connect the cables to a front panel jumper,,,,,I do not thing so,,,,,but I did connect them
     
    zillah, Aug 31, 2008
    #1
  2. Chai

    Chai Administrator Staff Member

    Hmm, try taking out the motherboard from the case and power up again?
     
    Chai, Aug 31, 2008
    #2
  3. zillah

    zillah Newbie

    I did , but it did not work as well
     
    zillah, Aug 31, 2008
    #3
  4. Chai

    Chai Administrator Staff Member

    Take everything out except the processor. I mean even RAM, graphics card etc. Just to see if it starts up.
     
    Chai, Aug 31, 2008
    #4
  5. Adrian Wong

    Adrian Wong Da Boss Staff Member

    You should also try resetting the CMOS settings.
     
    Adrian Wong, Aug 31, 2008
    #5
  6. zillah

    zillah Newbie

    I did.

    I did

    How can i check if the motherboard is dead or not ?
     
    zillah, Sep 1, 2008
    #6
  7. Chai

    Chai Administrator Staff Member

    You mean you can't even start up with just the processor in it?
     
    Chai, Sep 1, 2008
    #7
  8. Unixlord

    Unixlord Newbie

    Depending on what the new case was you may have shorted the motherboard out.
     
    Unixlord, Sep 1, 2008
    #8
  9. jamotto

    jamotto Newbie

    You might check that both the 2x2 pin power plug and the 24 pin main power plug are in their connectors all the way.
     
    jamotto, Sep 1, 2008
    #9

Share This Page