Modding Guides

Discussion in 'Overclocking, Cooling & Modding' started by Max_87, Sep 21, 2004.

  1. Max_87

    Max_87 huehuehue

  2. sherren

    sherren Newbie

    A Psu Guide By me.How To Test Your PSU
    Well maybe you could start using it as a 'test' PSU. To test your fans, cold cathodes or other modding stuff whenever you want, without having to boot up your PC. Now you might be thinking that this wouldn't be a problem, just plug in the power cable of the PSU and start the air/light show.. right?

    Now first start searching for an ATX Power Supply Unit.
    This is the motherboard connector 20 pin

    2nd we need a paper clip or wire.Please make sure your PSU isn't plugged in while doing this mod! You might get a shock!

    Overall this is a very easy mod, just search for the connector with the green wire and insert an end from the paperclip. Then pick out one of the connectors with a black (ground) wire and insert the other end of the paperclip.

    After this cover the psu connector 20 pin with some tape, just to be safe in case anyone or anything touches it..

    Now plug in the power cable of your PSU.. and start running!
    Last edited: Nov 11, 2005
  3. mista_haqeem

    mista_haqeem Newbie

    thanx for the link...
    very useful...!
  4. firstknight

    firstknight Newbie

    i wan to have my fans continue running even after my computer shuts down. is it possible. is there a way for me to put a timer in it as well so that it will run and after the allocated timer sets in.
  5. firstknight

    firstknight Newbie

    Sorry... i tot i have seen a post concerning replacing a molex connector without a tool by using a self made stuff... Where can i find that post.

  6. Olle P

    Olle P Newbie

    There are molex connectors around that are designed not to require tools for mounting, IIRC.

  7. firstknight

    firstknight Newbie

    but then i need to remove from the current one... try to google but kinda difficult to find..

Share This Page