Worklog: Project Dragzon Case

Discussion in 'Overclocking, Cooling & Modding' started by sherren, Nov 11, 2005.

  1. Max_87

    Max_87 huehuehue

    Yeah, these kind of paint does have enough time to 'stick' and 'bond' onto the surface of the aluminum because it dries up too fast.

    Just like what happened to my casing :haha: paint job only last for one or two months until the paint is starting to chipping off :wall:
     
  2. sherren

    sherren Newbie

    oh i c mine will chipped off? sprayed 2 layers,still not enough?
     
  3. zy

    zy zynine.com Staff Member

    you think spraying as many layers will work ar :haha: .. you are just making it thicker :haha: ..

    even my floppy drive i accidentally chip off a small part of it exposing the white part de :haha:
     
  4. sherren

    sherren Newbie

    A little update on the reservoir :thumbs: but didnt do a great job :sweat:

    Cleaned The Arcylic with Turpentine.
    [​IMG]
    Fixed the barbs and silicon around the edges
    [​IMG]
    Glueing The arcylic with epoxy glue
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Finally Done,but still have to wait for the silicon to dry,tommorow should be dry edi
    [​IMG]
    quite messy abit stain on da arcylic,i know is not that good,as long as can use can edi :thumbs:
    anyway tommorow might be some updates,getting da stuffs tommorow B)
     
  5. zy

    zy zynine.com Staff Member

    very messy :haha:
     
  6. Max_87

    Max_87 huehuehue

    No that won't work because the paint still doesn't stick well to the surface, and you are making it chipping off even easier by making the paint thicker :mrgreen:
     
  7. Chai

    Chai Administrator Staff Member

    Potential leakage... :shifty:
     
  8. Max_87

    Max_87 huehuehue

    LoL! :lol:

    What is that white thing? epoxy glue? You put too much adi :p messy lol
     
  9. sherren

    sherren Newbie

    white one silicon,aha no skill ma :oops:

    Teaser pics,Received B&D RTX 1& Work Bench Today
    RTX 1
    [​IMG]
    [​IMG]
    [​IMG]
    Some of the parts taken from the old rotary tool
    [​IMG]
    From Left>Bosch Tripod,Bosch Drill,B&D RTX1
    [​IMG]
    Assembling Work Bench
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  10. Adrian Wong

    Adrian Wong Da Boss Staff Member

    Wow.. You BOUGHT all that???? :shock: :shock: :shock:
     
  11. zy

    zy zynine.com Staff Member

    rich lucky bastard aint he ? :haha:
     
  12. Adrian Wong

    Adrian Wong Da Boss Staff Member

    RICH is right!!! :haha: :haha:
     
  13. Max_87

    Max_87 huehuehue

    leeeecchh!!!! :haha:
     
  14. sherren

    sherren Newbie

    A little update for today,
    [​IMG]
    [​IMG]
    [​IMG]
    Havent finish filing,one panel done

    zy wanna use :mrgreen: ?come over to my place lol :dance:
     
  15. Adrian Wong

    Adrian Wong Da Boss Staff Member

    Eh, are you trying to cut the words "RICH"?? :wicked: :mrgreen:
     
  16. zy

    zy zynine.com Staff Member

    come .. borrow me your RTX for few months.. i bring it to Nilai to mob my front panel bezel :whistle: :haha:
     
  17. How is the RTX holding up? Does it perform similarly to a Dremel?
     
  18. Chai

    Chai Administrator Staff Member

    It's very hard to find Dremel here... :shifty:
     
  19. sherren

    sherren Newbie

    Kl can get from jaya jusco they bring in dremel but the costs :wicked: :shock:
     
  20. What's the price difference between the RTX and the Dremel? Here it's about 2,000 Philippine pesos or about $40USD.

    Retail price of an RTX is about 4,000Php if I recall correctly. Around $80USD give or take.
     

Share This Page